Related Items:

BRIGADE A16 Black Snap Tie Omni Wedge 5M

Black Snap Tie Omni Wedge 5M - 100 pcs/box

Price: $177.00

14in. x 8-1/4in. Standard Snap Tie w/1in. Cone -100 pc/box

14in. x 8-1/4in. Standard Snap Tie w/1in. Cone -100 pc/box

Price: $141.00

Item #: ST-14-4.75
Availability: In Stock
Usually ships In 1-3 Business Days
  • 2,250 lbs. SWL
  • Available in any length from 6in. to 48in.
  • 1" plastic cone
  • Available upon request metal cone, hex nut spreader, flat fixed washer or cupped loose washer
  • Can be manufactured with a tight fitting neoprene
  • Washer located near the center of tie to eliminate water seepage along the tie
Price: $123.00

    Quantity:
    Concrete form Snap ties are basically tension members. They are designed to resist the lateral pressure of fresh concrete on vertical forms. When properly fitted with cones or other they hold the wall forms at the proper distance to create the desired concrete wall thickness. The cones allow the snap tie to be broken off inside the concrete for surface patching.

    INSTALLATION

    1. Drill holes in plywood 1/8in. larger than the snap tie head (usually 5/8in. diameter drill bit will be required
    2. Place the ends of snap ties through the holes in the plywood
    3. Place the bracket ( Omni wedge) on the tie
    4. The proper tie head position is at the midpoint orhigher of the Omni wedge slot. Correct spacing between double wales is 5/8in. to 3/4in.
    5. Omni Wedge bracket is utilized to hold a single wale and can be installed before or after the wales have been positioned