Related Items:

1-1/4in. Hammer Drive Anchor Stainless Steel Nail -500 pcs

Powers #2864 1-1/4in. Hammer Drive Anchor Stainless Steel Nail -500 pcs

Price: $126.50

1in. Hammer Drive Anchor Stainless Steel Nail- 500 pcs

Powers 2858 1/4in. x 1in. Hammer Drive Anchor Stainless Steel Nail- 500 pcs

Price: $130.00

Item #: 1ZHD14212-B
Availability: In Stock
Usually ships In 1-3 Business Days
Specifications, Listings and Approvals

Diameter: 1/4in.
Body Material: Die Cast Zamac Alloy
Pin Material: Cold Rolled Steel
Head Style: Mushroom
Finish: Zinc Plating ASTM B633
Federal Specifications: GSA FFS-325, GroupV, Type 2, Class 2

Price: $166.50

    Sometimes referred to as Zamac Nail in Anchors , they are made from corrosion resistant ZAMAC alloy and can be used in concrete, block, brick or stone. Hammer Drive anchors are installed in pre-drilled holes with a hammer strike that drives a nail into the anchor body, expanding the anchor to form a tight fit. These anchors secure light loads to masonry materials.

    2-1/2in. x 1/4in. Hammer Drive anchors - Zinc Coated

    Installation:

    1. Drill a hole in base material using a carbide drill bit the same diameter as the nominal diameter of the anchor to be installed.
    2. Drill the hole to specified embedment depth, plus 1/4in. for pin extension, and blow hole clean using compressed air.
    3. Position fixture and insert Hammer Drive anchor.
    4. Tap with hammer until flush with fixture, then drive pin until flush with top of head.
    • Made from corrosion resistant ZAMAC alloy
    • Used with Concrete, Block, Brick or Stone
    • Easily hammered into pre-drilled hole
    • Virtually tamperproof
    • ZAMAC Body with hardened Zinc Plated Steel Nail
    • ASTM B633, SC1, Type III
    • Not for use in overhead applications
    • Packed 100 pcs/box


    Stainless Steel Nail version is also available.

    in.WEJ-IT