The Pure50+ is a two-component adhesive anchoring system. The system includes injection adhesive in plastic cartridges, mixing nozzles, dispensing tools and hole cleaning equipment. Pure50+ epoxy is designed for bonding threaded rod and reinforcing bar hardware into drilled holes in solid concrete base materials. It can also be considered for bonding together cured concrete and masonry materials together as well as filling large cracks and abandoned holes.
APPROVALS
International Code Council, Evaluation Service (ICC-ES) ESR-3576 for cracked and uncracked concrete
Code Compliant with the 2021 IBC/IRC, 2018 IBC/IRC, 2015 IBC/IRC and 2012 IBC/IRC
Tested in accordance with ACI 355.4/ASTM
E488, and ICC-ES AC308 for use in structural concrete with designs
according to ACI 318 (-19 & -14) Chapter 17 and ACI 318 Appendix D
Evaluated and qualified by an accredited
independent testing laboratory for recognition in cracked and uncracked
concrete including seismic and wind loading
Florida Building Code, FBC Supplement including HVHZ (within ESR-3576)
Compliant with NSF/ANSI/CAN Standard 61 for drinking water system components - health effects
Also classified as lead free in accordance with NSF/ANSI/CAN 372
Compliant with California DPH for VOC emissions and South Coast AQMD for VOC content (LEED v4.1)
Conforms to requirements of ASTM C881
including C882 and AASHTO M235, Types I, II, IV and V, Grade 3, Classes B
& C (also meets Type III except for elongation)